Specification
Model BJ
 
1951 - 1955
* Production period in Japan.
  The period of introduction for this generation model may vary by region.
 

GROSS VEHICLE WEIGHT RATING 1,875kg
NO. OF SEATS DIMENSIONS 4
Wheelbase 2,400mm
Overall length, with front bumper (OAL) 3,793mm
C/1 of rear axle to end of frame (AF) 813mm
Bumper to center of front axle (BA) 580mm
Turning radius 5,500mm
Tread - front wheels 1,390mm
Tread - rear wheels 1,350mm
Ground clearance - front 215mm
Ground clearance - rear 210mm
Overall width - front (with fender end) 1,575mm
Overall width - rear (with outside of deck) 1,575mm
Height from top of frame to ground, loaded (approximate) - front 541mm
(approximate) - rear 616mm
FRAME Pressed steel, Girder type, 50 x 130 x 3.2m
ENGINE Six cylinders, valve-in-head type, 84.1mm bore, 101.6mm stroke. Displacement, 3,386cc ; compression ratio, 6.4 ; Brake hp., 85 at 3,200r.p.m. ; Maximum torque, 22kg-m at 1,600 r.p.m. Four steel backed, replaceable-shell, precision-type main bearings ; total projected area, 91.5 sq. cm., crank pin bearing ; total projected area, 107 sq. cm.
LUBRICATION Pressure, Splash and Jet type. Specially treated paper oil filter. Oil capacity, 4.1qt. (4.7lt.)
COOLING SYSTEM Centrifugal pump circulation, fin-and-tube radiator. pump driven by V-type fan belt. Capacity, 16.7 qt. Bellows-type thermostat.
IGNITION 6-volt, vacuum control, full-automatic distributor.
GENERATOR 6-volt, 40-ampere, shunt-wound, belt-driven.
LIGHTS Semi-sealed-beam headlights, interchangeable with sealed-beam headlights of SAE standards.
BATTERY 6-volt, 9-positive plates, 120amp-hour (20hr. rating).
STARTING MOTOR 6-volt, maximum torque, 1.6kg-m.
CARBURETOR Downdraft type.
AIR CLEANER Synthetic resin treated paper filter type.
FUEL SYSTEM Diaphragm-type fuel pump driven from camshaft. Gasoline filter. 41.5lt tank.
CLUTCH 275mm, single-plate, with rubber vibration damper.
TRANSMISSION Four speed forward, one reverse.
TRANSMISSION REDUCTIONS First, 5.53:1 ; second, 3.48:1 ; third, 1.71:1 ; fourth, 1:1 ; reverse, 5.6:1.
TRANSFER Single stage.
PROPELLER SHAFT Large-diameter, heavy-steel tubing. 2-piece shaft, first for front drive. second for rear drive. Dynamically balanced.
UNIVERSAL JOINT Trunnion type spider and needle roller bearing.
AXLES Four wheel drive. Front, full-floating ; Rear, semi-floating. Banjo type, steel housing. Pinion, overhung mounted on taper roller. Reduction ratio, 4.11:1.
STEERING GEAR Hindley-worm-and-sector-roller type. Gear ratio, 21:1.
BRAKES Service : 4-wheel, hydraulic, internal-expanding type. Parking : External band brake mounted transmission rear end.
SPRINGS Front and rear, semi-elliptic. Front, 1,000 mm Span, 45mm x 6mm-9 ; Rear, 1,150mm Span, 45mm x 6mm-10.
WHEELS Steel disc wheel.
STANDARD TIRES 6.00-16, 6-ply or 6.50-16, 6-ply.
CONTROLS Throttle, choke, light, and winker control knobs on instrument panel. Accelerator, clutch, and service brakes operated by pedals.
ACCESSORIES Standard : Canvas cove, 4-shock absorber, one spare tire, hand tool set, auxiliary gasoline tank. (Optional : Pintle hook, trailer socket, red lamp, siren.)
DIFFERENT BODIES AVAILABLE ON THE SAME CHASSIS Standard : as specified above.
Toyota BJ Truck : Loading capacity 500kg
No. of sesats 2 in cab 6 in deck.
Toyota BJ Pickup : Loading capacity 500kg
No. of sesats 5